Quest Bali Dual Purpose Ceramic Fan Heater

Quest Bali Dual Purpose Ceramic Fan Heater

A mains-powered, compact, and portable dual-purpose heater with a ceramic heating element. The use of dual ceramic heating elements means that this heater warms up very quickly.
The temperature can be controlled by two different methods on this heater. Firstly, you have dual settings for the heater allowing you to run it at either 750w (warm air) or 1500w (hot air). This setting allows you to run the heater at a lower wattage when the temperature isn’t very cold. This not only makes the heater cheaper to run but also helps ensure you do not trip any site electrics. As well as the two different heater settings you have full control over the temperature of the area surrounding the heater. You can set the heater to heat the area up to different temperatures by using the thermostat switch on the heater. Once the temperature has been reached the heater will stop increasing the heat. If the temperature drops down, then the heater will start increasing the heat again. You have complete control.
The dual-purpose nature of the heater means that it can be used as a fan only, so it can heat in the winter and cool in the summer. The oscillating function means that the hot (or cool) air is moved around helping to heat the entire area rather than just in front of the heater.
It has dual security features built-in as well. You have an overheat function to ensure that the heater does not overheat and an anti-tip function so if the heater does tip over it cuts out automatically.

Features

Cools in the summer
Heats in the winter
Dual temperature controls
Low wattage
Quick to heat up
Oscillating function
Anti-tip security cut off
Overheat security cut off
Carry handle
Power indicator
Lightweight and portable

Materials and Dimensions

ItemCode : 047519
Size: 16 x 14 x 23 cm.
Weight: 1.47 kg.
Voltage: 220 - 240v
Frequency: 50/60 Hz
Wattage: 750 or 1500W